Your Landlord Recommended a Contractor. Here’s What That Does and Doesn’t Tell You

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat.

Default Button Text
Nov 20, 2026
O contractor inspecting restaurant remodeling with the customer.

You've signed the lease. A day or two later, the property manager emails you a name: "This is the contractor we use. They know the building."

That's true, and it's useful. But it answers a different question from the one you're asking. The landlord is telling you this contractor can work in their building. You need to know whether they can build your business. Sometimes those are the same thing. In a restaurant, a dental office, or a heavily customized store, they often aren't.

Here's how to tell which situation you're in before you sign anything.

‍

Is the landlord's recommended contractor a safe choice?

A landlord's recommendation is good evidence that a contractor can work in that specific building. It isn't evidence that they can build your kind of space. Which of those matters more depends on what you're building.

Think of it as two separate skills. Building knowledge means knowing the electrical service, where the plumbing risers run, how the property manager handles approvals, and when the freight elevator can be booked. Use knowledge means knowing what a commercial kitchen, a dental operatory, or a retail sales floor actually needs from its walls, ceilings, and systems. A landlord's recommendation vouches for the first skill. It says very little about the second.

‍

Why does your landlord recommend this particular contractor?

Usually because the contractor has done the landlord's own work in that building. That means base-building upgrades, spec suites built to attract tenants, and turnovers between tenants. The contractor has proven they can meet the landlord's standards, follow the building's rules, and finish without causing problems for other tenants.

There are a few other common reasons:

  • Warranties. If the roof or the heating, ventilation, and air conditioning (HVAC) equipment is under warranty, the landlord may want a contractor they trust to touch those systems so the warranty isn't put at risk.
  • Building standards. Many landlords specify finishes and equipment that match the rest of the property. A contractor who has installed those before is an easy choice.
  • Easier oversight. A contractor who already knows the approval process, the work hours, and the dust and noise rules takes less of the property manager's time.

Notice what's missing from that list. A landlord's recommendation is rarely based on how well the contractor served previous tenants' businesses. It's based on how well the contractor served the building.

‍

When is the landlord's contractor probably your best option?

When your space looks like what they've already built in that building. If you're moving into a standard office suite and the landlord's contractor has built several just like it on the floors above you, they're likely your fastest path.

In that situation, their building knowledge is worth real time. They already know where to tie into the existing systems. They've been through the landlord's approval process. They know what the property manager will push back on. A second contractor would have to learn all of that on your project.

The same goes for simple retail in a center where the landlord's contractor has built similar storefronts. If your space doesn't need anything the building hasn't seen before, a recommendation from the landlord is a reasonable shortcut. You should still ask the questions further down this page, but you may not need to look much further.

‍

Where does the landlord's recommendation stop telling you enough?

In spaces where the code drives the scope. Restaurants, medical and dental offices, and retail with heavy custom work all need systems that a typical office tenant improvement (TI) never touches. A contractor who has only built offices in your building may not know what those systems require, or how they interact with each other and with the building.

Restaurants

A commercial kitchen brings a whole set of requirements a standard office doesn't. Under the California Mechanical Code, a Type I hood is required above commercial cooking equipment that produces grease vapors. That equipment also needs an approved automatic fire-extinguishing system. The fire-extinguishing system has to work with the building's fire alarm, so the hood, the suppression system, and the alarm have to be coordinated.

Under the California Plumbing Code, Section 1014 governs grease interceptors and how they're sized. Many cities and sewer districts add their own requirements on top of that. Add gas lines, higher electrical capacity for cooking and refrigeration, and ventilation sized for a kitchen, and you have a project where one undersized or uncoordinated system can mean redesign, permit delays, or rework after the walls are closed.

Medical and dental offices

Medical and dental spaces need infrastructure an office build-out never includes. Dental operatories typically need plumbing at each chair. They also need vacuum and compressed air systems, and often medical gas such as nitrous oxide or oxygen. Rooms with X-ray equipment usually need shielding designed for that equipment.

Medical gas and vacuum systems in California are governed by NFPA 99, the national Health Care Facilities Code. NFPA 99 requires installation by a certified medical gas installer. For most systems, it also requires independent testing by a separate verifier before the system goes into use.

Some clinics also fall under extra state building standards. Certain licensed clinics in California must meet "OSHPD 3" standards, found in Section 1226 of the California Building Code. The Department of Health Care Access and Information (HCAI) publishes those standards. In most cases they're enforced by your city or county building department. The City of Sacramento, for example, has its own request form for HCAI review of these clinics. Whether your clinic falls under OSHPD 3 depends on how it's licensed. A contractor who has never built one may not know to ask.

Retail with custom fit-out

A retail space can be simple or highly specific. A shell with standard lighting and finishes is well within any experienced TI contractor's range. Custom storefront framing, signage, display lighting, and casework with plumbing (for example, a sink in a salon or a cosmetics counter) are different. Each one needs power, plumbing, or structure planned before the walls go up. If your store's design is part of your brand, ask whether the contractor has built that kind of space before, not just retail in general.

‍

What happens when your landlord's standards and your business's needs disagree?

The build usually follows the landlord's standards unless you push for your own. Landlords are planning for the tenant after you. That usually means building-standard finishes, electrical capacity sized to what the building normally supports, and as few changes as possible to the sprinkler layout, structure, or main electrical service.

Those are reasonable goals for an owner. They can still conflict with what your business needs. A kitchen may need more power than the building standard provides. A clinic may need walls exactly where the landlord would rather not have them. A store may want a ceiling and lighting design that doesn't match the rest of the center.

A contractor who has spent years meeting a landlord's expectations will tend to default to them. That isn't bad faith. It's who they've been building for. But it means you, or someone working for you, need to be the one making the case for your business's requirements, in writing, before the plans are final.

‍

Who controls your scope if the landlord pays the contractor from your TI allowance?

Depending on your lease, the landlord may have a real say in what gets built. Many leases include a tenant improvement allowance: money the landlord puts toward your build-out. How that money moves matters.

Some landlords reimburse you after the work is done. Some pay the contractor directly. Some release funds against invoices, or hold everything until they approve the finished work. If the landlord is paying the contractor directly, the contractor is being paid by someone other than you. That can shape whose approval they look for when a decision comes up.

The terms are usually in the work letter, the part of your lease that covers the build-out. Look for three things:

  1. Who pays the contractor, and when.
  2. Who approves the plans before construction starts.
  3. Who approves changes once work is underway.

If the answers point to the landlord, your scope is partly in their hands. That isn't necessarily a problem, but you should know it before the first wall goes up.

‍

What should you ask before you hire the landlord's contractor?

Ask questions that show whether they've built your kind of space, not just worked in this building. A good contractor will answer these easily. Vague answers are useful information too.

  • "What have you built in this building, and for what kinds of tenants?" "All the office turnovers" tells you something real. "We've worked with them for years" tells you less. Ask for specifics.
  • "Have you built a space like mine?" For a restaurant, ask whether they've installed Type I hoods and grease interceptors. For a dental office, ask about vacuum, compressed air, and medical gas. Ask for addresses or references you can call.
  • "Which specialty subcontractors would you bring in?" A restaurant needs a mechanical subcontractor who knows kitchen exhaust. A dental office needs a certified medical gas installer. A general contractor should be able to name who they'd use.
  • "Who approves changes once work starts: me, or the landlord?" The answer tells you whose decisions will control the project.
  • "What does your license cover?" Every contractor in California needs a license from the Contractors State License Board (CSLB) in the right classification for the work. You can check any contractor's license status and classification with CSLB's online license lookup.

If you're building a code-driven space, get one more bid from a firm that has built that use before. Don't just compare the totals. Compare how each bid describes the hood, the grease interceptor, the medical gas system, or whatever your space depends on. A bid that leaves those systems vague is often the one that changes later.

‍

Can you bring your own contractor instead of the landlord's?

That depends on your lease. There are three common setups, and the work letter usually says which one you have.

The landlord approves your contractor

Many leases let you choose your own contractor, as long as the landlord approves them. Approval usually depends on licensing, insurance, and sometimes experience. In this case, the landlord's recommendation is just a suggestion, and you're free to hire someone else who meets the requirements.

You choose from an approved list

Some leases limit you to contractors on the landlord's approved list. If you're in that situation, the questions above still apply. Ask them of each contractor on the list, and pick the one whose experience best matches your use.

The landlord builds it for you

In some deals, the landlord manages the build-out and hires the contractor. You have less control over who does the work. Your leverage then comes from the plans themselves. The more clearly your requirements are documented before construction, the less room there is for them to be value-engineered away.

If your lease isn't clear, ask the landlord or your broker before you hire anyone. It's much easier to sort out who's allowed to build your space before work starts than after.

‍

So should you take the recommendation?

If you're building a standard office or a simple retail space in a building where the landlord's contractor has done the same work before, probably yes. Ask the questions above, check their license, and let their knowledge of the building save you time.

If your space is code-driven (a restaurant, a medical or dental office, or a store with serious custom work), the recommendation is a starting point, not an answer. What matters most is whether the contractor has built your use. The decisions that make or break these spaces happen at the design stage, before the permit is filed.

That's the kind of project we're set up for. At Global Arch, design, permits, and construction sit with one company. The people who draw your kitchen or clinic are the ones who take it through plan check and build it, so nothing gets lost between a designer, a permit office, and a contractor who each own one piece. If you already know what your space needs to do and want one team to take it from plans to opening, we'd be glad to look at it with you.

Nov 20, 2026